Back to Shop

Silic8 MPL1 Course Gritted Plaster Primer

£68.63£139.96

MPL1 is a mineral based plaster primer which is designed to control many high suction backgrounds whilst still remaining vapour open. MPL1 can also be used to consolidate problematic surfaces and substrates. The primer’s course gritted surface provides a key for a new suitable plaster to bond to. For thin skim coats you may want to consider our FP1. MPL1 has a high bond strength and is the only plaster primer on the market to be independently tested for vapour diffusion to reassure you that water vapour is not trapped in the fabric of your building.

Clear selection
SKU: mpl1

Product Description

MPL1 is a mineral based plaster primer which is designed to control many high suction backgrounds whilst still remaining vapour open. MPL1 can also be used to consolidate problematic surfaces and substrates. The primer’s gritted surface provides a key for a new suitable plaster to bond to. MPL1 is the only plaster primer on the market to be independently tested for vapour diffusion to reassure you that water vapour is not trapped in the fabric of your building.

Some typical substrate types: Masonry backgrounds, magnesium silicate boards, historic or new plasters (lime, cement or gypsum), wood, and wood type boards, terracotta and some ceramic tiles and paints*.  An in-house testing facility for bond strength is offered if you have specific requirements**

Coverage: On an even surface 600grams of MPL1 will cover approximately 1m² (16kg  will cover approximately 27m ²). Allow more for uneven surfaces.

Use: Stir well before use. Apply with a broad brush using short strokes and ensuring that the grit is evenly spread across the surface (see typical spread pattern below). The surface to be primed must be sound and dry. Where the surface is powdery or friable, work the primer in to the affected areas with a brush and test for bond strength after 24 hours.

Ensure that surfaces not to be primed are protected, particularly glass. Wash splashes, tools and brushes with water. Do not store or use in extremes of temperatures (<5 or above 30C). If splashed on the skin wash off immediately with water. Wear the appropriate Personal Protective Equipment; Refer to the Safety Data Sheet before use.

The primer can be plastered after 24 hours. Ensure that the plaster is appropriate to the task.

* We do not take responsibility for compatibility with any of the suggested or unlisted substrates types.

**A charge is made for this service  and is only indicative of actual bond strength. Not all substrates are suitable for testing at our facility. Due to the variation of substrate types we recommend that a representative area of substrate to be primed is first tested to satisfy all your requirements

Additional Information

Weight 18 kg
Silic8 MPL1

7kg, 16kg, 36 tin pallet

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.